AH Motion Controller – Operation Manual Function Block—DFB_CamCurveUpdate2 After DFB_CamCurve2 is executed, DFB_CamCurveUpdate2 can be used. If you want to modify a rotary cut curve, you can create a new rotary cut curve by DFB_CamCurve2, and then update the rotary cut curve by DFB_CamCurveUpdate2. Inputs Outputs _7 7-50 Name Function Data type Setting value (Default value) Timing for updating Execute Executes the instruction to update the cam profile. BOOL True/False - (False) Name Function Data type Output range (Default value) Done True when the cam curve is established. BOOL True/False (False) Busy True when the instruction is executed.
BOOL True/False (False) Error True if an error occurs. BOOL True/False (False) ErrorID Indicates the error code if an error occurs. Refer to Appendices for error code descriptions. DWORD 0x0000, 0x3100, 0x3101, 0x3102 (0)