AH Motion Controller – Operation Manual 2.2 Wiring This section introduces the connection structure and the wiring of the basic configuration with power supplies and CPUs. For detailed wiring information including other components, please refer to AH Motion Controller – Hardware Manual . 2.2.1 Basic System Configurations The AH Motion Controller series CPU basic configurations include the AH Motion Controller CPU Network overview of the system connection structure. Configuration , AH500 Series Module Configuration , and Supported Software .
Refer to the below diagram for the ISPSoft AH500 Series Module Configuration AH Motion CPU Power Supply CPU AH I/O modules USB(RS-232) CPU Rack LAN or EtherNet/IP AH MotionNetwork Configuration Bullt-In EtherCAT port Bullt-In E therNet/IP port EtherCAT Servo drives/encoder input slaves General-purpose slaves 2.2.2 Wiring Power Supply Modules Precautions Connecting AC power cables 1. Please separate the power cable of AHPS05-5A from the power cables for I/O devices and other devices. If there is much noise, connect an isolating transformer. Isolating transformer AHPS05-5A AC power supply 100-240 V I/O equipment Another piece of equipment 2-6 2 _ Support Software