Chapter 4 Operating ISPSoft 4.6 Testing and Debugging a Program 4.6.1 Creating a Connection Before a program and parameters are downloaded to a PLC or monitored online, ISPSoft must be connected to the PLC. for more information about connecting ISPSoft to a PLC in other ways. Please refer to operation manuals for more In this example, ISPSoft is connected to the CPU module AHxxEMC-5A through a USB cable. Please refer to section 3.2 information about wiring. Those who have connected ISPSoft to a PLC successfully in accordance with the contents of section 3.2 can skip this section. (1) Install the modules on the main backplane in accordance with the hardware configuration in HWCONFIG.
Make sure that the wiring is correct, and then power the CPU module. (2) Make sure that COMMGR is started, and the icon representing COMMGR is displayed on the system tray. If the icon representing COMMGR is not displayed on the system tray, you can start COMMGR by clicking the shortcut on the Start menu ( Start > Programs > Delta Industrial Automation > Communication > COMMGR) . (3) Double-click the icon representing COMMGR on the system tray to open the COMMGR window. Click Add in the 4_ COMMGR window to create a driver. 4-35