AH Motion Controller – Operation Manual The description of the columns in the monitoring table is as follows. After the monitoring table is created, you can monitor the items in the monitoring table in the online mode. Besides, after you right-click an item in the monitoring table in the online mode, a context menu which is the same as the context menu _4 value in the item by clicking an item on this context menu. which will after a device in the program editing window is clicked will appear. You can change the state of the item or the The program created in this chapter can be tested and debugged through the monitoring table created in this section.
Please refer to chapter 14 of ISPSoft User Manual for more information about testing and debugging a program. 4.6.4 Setting a Real-time Clock The real-time clock in a PLC can be set by a tool provided by ISPSoft. Before the real-time clock in a PLC is set, you have to make sure that ISPSoft is connected to the PLC normally. Please refer to section 3.2 for more information about communication setting. (1) After you click Set RTC on the Tools menu, the SET RTC window will appear. The date displayed at the top of the window is the date retrieved from the PLC when the window is opened, and the time displayed at the top of the window is the time retrieved from the PLC when the window is opened.
4-46 Column Description Source The source of a symbol Identifier The identifier of a symbol Device name The name of a device monitored Status If a bit device or a contact is monitored, the state will be ON or OFF. Data type If a symbol is monitored, the data type of the symbol will be displayed. Value (16 bits) In the online mode, a 16-bit value is displayed. Value (32 bits) In the online mode, a 32-bit value is displayed. Float In the online mode, a 32-bit floating-point number is displayed. Radix You can select a format in which a value is represented. Comment The comments on a device or the comment on a symbol is displayed.