AH500 Module Manual Revision History Version Revision Date 1 s t The first version was published. 2013/03/15 2 n d 1. Chapter 1: The information about AH08PTG-5A, AH10PFBM-5A, AH10PFBS-5A, AH10COPM-5A, AHRTU-DNET-5A, and AHRTU-PFBS-5A is added. 2. Chapter 2, Chapter 3, and Chapter 4: The information about high accuracy is updated. 3. Chapter 5: The information about AH08PTG-5A is added. 4. Chapter 7 and Chapter 10 in the first version are interchanged. 5. Chapter 7: The description of the channels which are supported is added to section 7.1. Section 7.2.8 is updated. The wiring diagram for an NPN encoder in section 7.2.9 is updated.
Owing to the fact that channel 1~channel 4 is changed to channel 0~channel 3 in ISPSoft, the fourth figure in section 7.4 is changed. The description of a normal exchange area is added to section 7.6. Register names in section 7.7 are updated. The channel numbers and the descriptions of the registers in section 7.9 are updated. Section 7.10 is updated. 6. Chapter 8: The information about CR#4099~CR#32786 is added to section 8.4. The description of CR#37376~CR#37871 is corrected. Method 2 is added to section 8.7.1.2. 7. Chapter 9: Section 9.5 is added. 8. Chapter 10: The name given to AH10DNET-5A is updated. 9. Chapter 11, Chapter 12, Chapter 13, Chapter 14, and Chapter 15 are added.
2014/03/05 3 r d 1. Chapter 1: the information about AH08AD-5A and AH08DA-5A is added; update information about AH10COPM-5A. 2. Chapter 2: the information about AH08AD-5A is added; update information about wiring. 3. Chapter 3: the information about AH08DA-5A is added; update information about wiring. 4. Chapter 4: update information about wiring. 5. Chapter 5: update information about isolation, conversion time for two-/three-wire configuration, and the software image of the setting the warning LED indicator. 6. Chapter 6: update information about isolation. 7. Chapter 7: update figures of the linear accumulation and circular accumulation in the section 7.9.5. 8. Chapter 10:
update transmission speeds, 2016/08/15