Chapter 8 Serial Communication Module AH10SCM 8-7 CR# Attribute Register name Description in SCMSoft. Data register from which data is read=Value in CR#22+Offset 23 R/W Base register used for the receiving of data through COM1 The communication protocol for exchanging data through COM1 must be UD Link. Users have to select Base+Offset in the Mapping Register box in the Message Variable Edit window in SCMSoft.
Data register into which data is written=Value in CR#23+Offset 24 Reserved 25 R/W Triggering the sending/receiving of the packets in a group through COM2 Triggering the sending/receiving of the packets in a group through COM2 26 R/W Base register used for the sending of data through COM2 The communication protocol for exchanging data through COM2 must be UD Link. Users have to select Base+Offset in the Mapping Register box in the Message Variable Edit window in SCMSoft. Data register from which data is read=Value in CR#26+Offset 27 R/W Base register used for the receiving of data through COM2 The communication protocol for exchanging data through COM2 must be UD Link.
Users have to select Base+Offset in the Mapping Register box in the Message Variable Edit window in SCMSoft. Data register into which data is written=Value in CR#27+Offset 28 R/W Triggering the sending/receiving of groups of packets in sequence 0: Not triggering it 1~254: Number of times the sending/receiving of groups of packets is triggered in sequence 255: The sending/receiving of groups of packets is continually triggered in sequence. 29~ 4098 Reserved 4099~ 4114 R/W Selecting Enable boxes to enable the reading of data from bit devices through COM1 (256 values/16 words) Bit=0: Disabling the reading of data from a bit device through COM1 Bit=1:
Enabling the reading of data from a bit device through COM1 8195~ 8210 R/W Selecting Enable boxes to enable the reading of data from word devices through COM1 (256 values/16 words) Bit=0: Disabling the reading of data from a word device through COM1 Bit=1: Enabling the reading of data from a word device through COM1 12291~ 12306 R/W Selecting Enable boxes to enable the writing of data into bit devices through COM1 (256 values/16 words) Bit=0: Disabling the writing of data into a bit device through COM1 Bit=1: Enabling the writing of data into a bit device through COM1 16387~ 16402 R/W Selecting Enable boxes to enable the writing of data into word devices through COM1 Bit=0:
Disabling the writing of data into a word device through COM1 Bit=1: Enabling the writing of data into a