AH500 Module Manual End: Coming to and end Fail: Users can specify an action which follows the execution of a command. They can select Next , Goto , or Abort . Next: The next command is executed. If the command which is being executed is command 1, the next command which will be executed is command 2. Goto: Users can specify a command which should be executed much later. Abort: Coming to and end Retry: The sending of a command can be retried after the sending of the command fails. Users can set the number of times the sending of a command is retried. Repeat: After a command is executed successfully, it can be executed repeatedly.
Users can set the number of times the execution of a command is repeated. Send wait: Users can set an interval between commands. The default is 0 milliseconds, that is, the next command is sent after a reply is received. Timeout: If no reply is received after a specific period of time, there is communication timeout. The default is 50 milliseconds. 8.6.3.3 Sequence After users right-click a blank and click Add Group , they can select groups and set the sequence of executing the groups. After the sequence is downloaded, the packets in the groups will be sent/received through a communication port.
Besides, the users can select groups which will be executed if errors occur by clicking the Error Execute Group column. If an error occurs when a group is executed, a group which is specified will be executed. 8-32