AH500 Module Manual 9.1 Introduction AH10/15EN-5A is an AH500 series Ethernet module. The data in an AH500 series CPU module can be transmitted to a remote device through Ethernet. Besides, the CPU module can control the remote device through ISPSoft, and a program can be downloaded to the CPU module through ISPSoft. 9.1.1 Functions There are two Ethernet ports. They can automatically detect whether the transmission speed is 10 Mbps or 100 Mbps. Auto-MDI/MDIX It supports the Modbus TCP protocol.
(It supports a master mode and a slave mode simultaneously.) It supports the IEC60870-5-104 protocol (available for AH15EN-5A) It supports EtherNet/IP protocol (available for AH10EN-5A V2.0) Sending emails It supports SNMPv1 and SNMPv2. It automatically adjusts the real-time clock in an AH500 series CPU module through the Network Time Protocol (NTP). Point-to-point data exchange 9.1.2 Specifications 9-2 Network interface Item Specifications Connector type RJ-45 with auto-MDI/MDIX Transmission 802.3 and 802.3u interface Transmission Category 5e cable The maximum length is 100 meters.
cable Transmission 10/100 Mbps auto-detection speed Communication protocol for AH10EN-5A Communication ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, SNMP, SMTP and protocol EtherNet/IP Communication protocol for AH15EN-5A Communication ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, SNMP, SMTP and protocol IEC60870-5-104 Electrical specifications Item Specifications Supply voltage 5 V DC Electric energy consumption 1.5 W Insulation voltage 2,500 V DC Weight Approximately 139 g Communication protocol ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, SNMP, SMTP and EtherNet/IP Communication protocol ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, SNMP, SMTP and IEC60870-5-104