Chapter 9 Ethernet Communication Module AH10/15EN 9.3.3 Functions of the Control Registers 9-7 Number Attribute Register name Description HW LW - #5 R Reserved - #6 R Reserved - #7 R Reserved - #8 R Reserved - #9 R Reserved W Trigger for the sending of the email Every bit represents a trigger. 1: The email is sent. - #10 W Mode of the data exchange 0: The execution of the data exchange stops. 1: The data exchange is executed once, and then is not executed. 2: The data exchange is executed continually. - #11 W Triggering the transmission of data 1~data 6 Every bit represents a remote device. 0: The data exchange is not triggered. 1: The data exchange is triggered.
- #12 W Triggering the transmission of data 17~data 32 Every bit represents a remote device. 0: The data exchange is not triggered. 1: The data exchange is triggered. - #13 W Triggering the transmission of data 33~data 48 Every bit represents a remote device. 0: The data exchange is not triggered. 1: The data exchange is triggered. - #14 W Triggering the transmission of data 49~data 64 Every bit represents a remote device. 0: The data exchange is not triggered. 1: The data exchange is triggered. - #15 - #16 R Reserved - #17 R Reserved - #18 R Reserved - #19 R Reserved CR number Attribute Register name Description HW LW R Model code The model code is a default value.
The model code of AH10EN-5A is 16#5881. The model code of AH15EN-5A is 16#5882. - #0 R Version of the system The version of the system is represented by a hexadecimal value. For example, if the version of the software is 1.02, it is represented by 16#1020. - #1 R/W Operation mode 0: A single IP address is assigned, and the two ports function as a switching hub. 1: Two IP addresses are assigned, and the two ports operate individually. - #3 #5 #4 R/W IP address of port 1 IP address of port 1 #7 #6 R/W Subnet mask of port 1 Subnet mask of port 1 R/W Gateway address of port 1 Gateway address of port 1 #9 #8 R/W Assigning an IP address to port 1 by a DHCP server 0: Static IP address 1:
An IP address is assigned by a DHCP server. - #10