AH500 Module Manual 11-16 Product picture Type Function CME-DN01 Used for connecting the E series AC motor drive to the DeviceNet network. CMC-DN01 Used for connecting the C2000, CH2000, CP2000 series AC motor drive to the DeviceNet network. DN-02 It converts DeviceNet to Modbus gateway with the DeviceNet interface at one end and the RS485 port at the other end. It is used for connecting the AC motor drive to the DeviceNet network. DVPDT01-S Used for connecting the S series PLC CPU to the DeviceNet network. The module can be connected to the extension port in the right side of the S series PLC CPU. DVPDT02-H2 Used for connecting the DVP-EH2/EH3 series PLC CPU to the DeviceNet network.
The module can be connected to the extension port in the right side of DVP-EH2/EH3 series PLC CPU. TAPCP01 The CAN bus topology tapping box with the 120 ohm resistor enclosed which is controlled to be effective or not via its switch.