AH500 Module Manual Explanation of “AHRTU-DNET Setup” interface: Note: When error treatment setting of AHRTU-DNET-5A is inconsistent with exception handling of each I/O module, option “RTU stop running” is selected in priority. 11.4.2.4 I/O Module Configuration Interface Double click I/O modules to set the parameter mapping configuration of each module on the “AHRTU-DNET Configuration” interface. 11-30 Item Explanation Default Output start It is the initial output address of AHRTU-DNET-5A and - device occupies one word. Input start device It is the initial input address of AHRTU-DNET-5A and occupies - one word.
When loses When being disconnected from the DeviceNet network, how RTU DeviceNet AHRTU-DNET-5A will treat the error. Options “RTU keep keep connection running” and “RTU stop running” are for selection. running When I/O module error When detecting that an error occurs in any one of I/O RTU modules, how AHRTU-DNET-5A will treat the error. Options keep “RTU keep running” and “RTU stop running” are for selection. running Software baud rate Setup of the extended baud rate of AHRTU-DNET-5A. Pick the - item so as to set the extended baud rate of AHRTU-DNET-5A. Download and save the data to AHRTU-DNET-5A. Only when both of DR1 and DR0 switches are ON, the extended baud rate will be effective.
Firmware version To show the firmware version of AHRTU-DNET-5A -