AH500 Motion Control Module Manual AH05PM-5A 1 Y0.0 - 5 Y0.1 - Y0.1+ Y0.2+ Y0.2 - Y0.3+ Y0.3 - Y0.8 Y0.9 COM 11 2.2 Wiring An AH500 series motion control module is an open-type device. It has to be installed in a control box which is free from dust, moisture, and shock/vibration. In order to prevent people who are not maintenance men from operating the device, protective measures are required (e.g. Users need a special tool or a key to open the control box). An AC power supply can not be connected to input/output terminals, otherwise the device will be seriously damaged. Before users power the device, they have to check the wiring of the power supply.
In order to increase the immunity against noise, the ground terminal on the device must be grounded correctly. 2-18 2 RU N ERR OR 3 S/S X0.0 X0.1 X0.8 X0.9 X0.12 X0.13 Y0.0+ 4 6 7 8 10 9 Number Name Description 1 Model name Model name of the module RUN LED indicator (green) Operating status of the module 2 ON: The module is running. OFF: The module stops running. ERROR LED indicator (red) Error status of the module 3 Blink: The module is abnormal.
4 USB port Providing the mini USB communication interface 5 Terminals Input/Output terminals Arrangement of the 6 input/output Arrangement of the terminals terminals 7 Extension port Used for updating the firmware 8 Label Nameplate 9 Set screw Used for securing the module 10 Connector Connecting the module and a backplane 11 Projection Used for securing the module