Chapter 2 Specifications and System Configuratio n Electrical specifications for the outputs on digital input/output modules *1: The scan cycle affects the frequency. *2: The terminals UP and ZP needs to be connected to the 24 V DC auxiliary power supply (-15%~+20%), and the rated current consumption is 1 mA/output. 2-12 Model Item AH16AR10N-5A Interrupt service routine The interrupt service routine numbers which can be set are in the range of 0 to 31.
Filtering cycle which can be set for an input channel 0.1 ms, 0.5 ms, 3 ms (default), 15 ms, or 20 ms Model AH16AN01R AH16AP11R AH16AN01T AH16AP11T AH16AN01P AH16AP11P AH16AN01S Item -5A -5A -5A -5A -5A -5A -5A Number of outputs 16 8 16 8 16 8 16 Connector type Removable terminal block Output type Relay-R Transistor-T (sinking) Transistor-P (sourcing) TRIAC-S 250 V AC, and below 30 V DC 12~30 V DC*2 12~30 V DC*2 120/240 V AC Voltage specifications 2 A/output (5 A/COM) 0.5 A/output (4 A/COM) 0.5 A/output (4 A/COM) 0.5 A/output (2 A/COM) Resistance Maximum Life cycle curve*3 12 W (24 V DC) 12 W (24 V DC) Not applicable Inductance load 20 W (24 V DC) 100 W (230 V AC) 2 W (24 V DC) 2 W (24 V DC) 60 W AC Bulb 1 Hz 100 Hz 100 Hz 10 Hz Resistance Maximum 0.5 Hz 0.5 Hz 0.5 Hz - output Inductance frequency*1 1 Hz 10 Hz 10 Hz 10 Hz Bulb Maximum OFF→ON 10 ms 0.5 ms 0.5 ms 1 ms+0.5 AC cycles Response time ON→OFF Model AH32AN02T AH32AN02P AH32AN02T AH32AN02P AH32AN02T AH32AN02P AH64AN02 TAH64AN02P Item -5A -5A -5B -5B -5C - 5C -5C -5C Number of outputs 32 32 32 32 32 32 64 64 Removable terminal block DB37 connector Latch connector Connector type Transistor–T (sinking) Transistor-P (sourcing) Output type Voltage specifications 12~30 V DC*2 Resistance 0.1 A/output (1 A/COM) Maximum Inductance Not applicable load Bulb Not applicable Maximum Resistance 100 Hz output Inductance - frequency*1 Bulb - Maximum OFF→ON 0.5 ms Response time ON→OFF