AH500 Programming Manual SR663~SR730 record the mapping error code occurring in the module table. If the mapping error occurs in the module table, the special data register belonging to this module will record the error code. Users can read the error code in the special data register to get the information about the error. 13. The flags related to the Ethernet SM1090, SM1091, and SM1106~SM1109 Please refer to section 12.2 in AH500 Operation Manual for more information about the LED indicators and the error codes. 14. The setting of the email sending SM1112~SM1113, and SM1116~SM1195 Before sending the email, users have to set the related parameters in the email.
If the setting fails, SM1112 will be set to ON. Besides, SM1113 will be set to ON if the sending of the email fails. The triggers (trigger1~trigger8) and the flags (SM1116~SM1195) are described below.
2-92 Main Description Extension backplane backplane Backplane Backplane Backplane Backplane Backplane Backplane Backplane Backplane Backplane Slot 1 2 3 4 5 6 7 8 SR663 SR675 SR683 SR691 SR699 SR707 SR715 SR723 Slot 0 SR664 SR676 SR684 SR692 SR700 SR708 SR716 SR724 Slot 1 SR665 SR677 SR685 SR693 SR701 SR709 SR717 SR725 Slot 2 SR666 SR678 SR686 SR694 SR702 SR710 SR718 SR726 Slot 3 SR667 SR679 SR687 SR695 SR703 SR711 SR719 SR727 Slot 4 SR668 SR680 SR688 SR696 SR704 SR712 SR720 SR728 Slot 5 SR669 SR681 SR689 SR697 SR705 SR713 SR721 SR729 Slot 6 SR670 SR682 SR690 SR698 SR706 SR714 SR722 SR730 Slot 7 SR671 - - - - - - - Slot 8 SR672 - - - - - - - Slot 9 SR673 - - - - - - - Slot 10 SR674 - - - - - - - Slot 11 SM Description Function number SM1090 The TCP connection is busy.
ON: TCP connection timeout SM1091 The UDP connection is busy. ON: UDP connection timeout SM1106 Ethernet connection error OFF: The Ethernet auto-negotiation succeeds. ON: The Ethernet auto-negotiation fails. SM1107 Basic setting error OFF: The basic setting is correct. ON: The basic setting is incorrect. SM1108 Filter setting error OFF: The filter setting is correct. ON: The filter setting is incorrect. SM1109 Basic management of the TCP/UDP socket─The local port is already used. The flag is ON when the same port is used.