Chapter 6 0BApplied Instructions API 0006~ 0011 Symbol: S 1 ： Data source 1 Word/Double word Taking AND= and DAND= for example S 2 ： Data source 2 Word/Double word Explanation: 1. The instructions are used to compare the value in S 1 with that in S 2 . Take the instruction AND= for example. When the comparison result is that the value in S 1 is equal to that in S 2 , the condition of the instruction is met. When the comparison result is that the value in S 1 is not equal to that in S 2 , the condition of the instruction is not met. 2. Only the 32-bit instruction can use the 32-bit counter. Example: 1. When X0.0 is ON and the current value in C10 is equal to 100, Y0.10 is ON. 2.
When X0.1 is OFF and the value in D0 is not equal to -10, Y0.11 keeps ON. 3. When X0.2 is ON and the value in (D11, D10) is less than 678,493, or when M3 is ON, M50 is ON.
6-8 Instruction code Operand Function D AND※ S , S 1 2 Comparing the values Device X Y M S T C HC D L SM SR E PR K 16# “$” DF S 1 S 2 Pulse instruction 16-bit instruction (5 steps) 32-bit instruction (5 steps) － AH500 AH500 API 16-bit 32-bit Comparison operation result number instruction instruction ON OFF 0006 AND＝ DAND＝ S ＝S 1 2 S ≠S 1 2 0007 AND＜＞ DAND＜＞ S ≠S 1 2 S ＝S 1 2 0008 AND＞ DAND＞ S ＞S 1 2 S ≦S 1 2 0009 AND＞＝ DAND＞＝ S ≧S 1 2 S ＜S 1 2 0010 AND＜ DAND＜ S ＜S 1 2 S ≧S 1 2 0011 AND＜＝ DAND＜＝ S ≦S 1 2 S ＞S 1 2