AH500 Programming Manual Example: When X0.0 is ON, the constants 100 and 200 are converted into the binary-coded decimal values which are stored in D0 and D1 respectively. The binary-coded decimal value in D0 is multiplied by the binary-coded decimal value in D1, and the product is stored in D10. Additional remark: 1. When the value in S 1 or the value in S 2 exceeds the range of values which can be represented by the binary-coded decimal values, i.e. 0~9999, the instruction B* is not executed, SM0 is ON, and the error code in SR0 is 16#200D (The binary-coded decimal value is represented by the hexadecimal number, but one of digits is not within the range between 0 and 9.). 2.
When the value in S 1 or the value in S 2 exceeds the range of values which can be represented by the binary-coded decimal values, i.e. 0~99999999, the instruction DB* is not executed, SM0 is ON, and the error code in SR0 is 16#200D (The binary-coded decimal value is represented by the hexadecimal number, but one of digits is not within the range between 0 and 9.). 3. The instruction does not support SM600, SM601 and SM602. 6-58