Chapter 6 Applied Instructions X0.0 Y0.0 Y0.1 Y0.2 Y0.3 5 seconds 5 seconds 5 seconds 6. When the conditional contact X0.0 is followed by the normally-closed contact Y0.0, the flashing currents pass through Y0.1 and Y0.2. When X0.0 is switched OFF, Y0.0, Y0.1, and Y0.3 are switched OFF, and T0 is reset to 0. X 0.0 Y 0.1 Y 0.2 5 seconds Additional remark: 1. If D +3 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If m is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If users declare the operand D in ISPSoft, the data type will be ARRAY [4] of BOOL.
6-161 5 seconds 5 seconds 5 seconds