AH500 Programming Manual API 1218 Symbol: D ： Device number Word n ： Bit number Word Explanation: 1. The instruction is used to set the n th bit in the register specified by D to 1. 2. When the instruction BSET is driven, the specified bit is set to ON. No matter the instruction BSET is still driven or not, the bit keeps ON. Users can use the instruction BRST to set the bit OFF. 3. The operand n should be within the range between 0 and 15. Example: When X0.0 is ON, the fifth bit in D10 is set to 1. b0 b15 D10 After the instruction is executed b0 b15 D10 Additional remark:
If n is less than 0, or if n is larger than 15, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 6-296 Instruction code Operand Function BSET P D, n Setting the bit in the word device to ON Device X Y M S T C HC D L SM SR E PR K 16# “$” DF D n Pulse instruction 16-bit instruction (5 steps) 32-bit instruction AH500 AH500 - 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 1