AL-C300 Series User's Guide Getting to Know Your Printer Using the Control Panel E Press the r Right button to carry out the operation indicated by an item, such as printing a configuration status sheet or resetting the printer, or to view the settings available for an item, such as paper sizes or emulation modes. Accessing the control panel menus Use the u Up and d Down buttons to scroll through available settings, then press the r Right button to select a setting and return to the previous level. Press the l Left button to return to the previous level without changing the setting.
When to make control panel settings In general, printer driver settings override settings made using the control panel. You should make the following settings by using the control panel because these settings cannot be made in the printer driver. Note: ❏ You need to turn the printer off and then on to activate the settings you changed in the Network Menu , USB Menu , USB Host Menu , or RAM Disk in the Setup Menu . ❏ Settings to select emulation modes and IES (Intelligent Emulation Switching) mode ❏ The OK button can be used instead of the r Right button in step 3 or 5.
❏ Settings to specify a channel and configure the interface F Press the l Left button once or more times to exit the control panel menus. ❏ Settings to specify the size of the memory buffer used to receive data How to access the control panel menus Note: Some menus and items appear only when a corresponding optional device is installed or an appropriate setting has been done. A Press the r Right button to access the control panel menus. B Use the u Up and d Down buttons to scroll through the menus. C Press the r Right button to view the items in a menu. Depending on the menu, the LCD panel displays an item and the current setting separated ( YYYY=ZZZZ ), or only an item ( YYYY ).
D Use the u Up and d Down buttons to scroll through the items, or press the l Left button to return to the previous level. 15