AL-C300 Series User's Guide Getting to Know Your Printer Network Menu See the Network Guide for each setting. Note: After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again. USB Host Menu Note: After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again.
23 Item Explanation USB I/F Allows you to activate or deactivate the USB interface. Settings (default in bold): On, Off USB Speed Allows you to select the operation mode of USB interface. Selecting HS is recommended. Select FS if HS does not work on your computer system. Settings (default in bold): HS, FS Buffer Size Determines the amount of memory to be used for receiving data and printing data. Note: ❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn it back on. Or, you can perform a Reset All operation, as explained in Reset Menu. ❏ Resetting the printer erases all print jobs.
Make sure the Ready light is not flashing when you reset the printer. Settings (default in bold): Normal, Maximum, Minimum Item Explanation USB Host Enables you to print directly from a USB memory via a USB Host interface. Settings (default in bold): On, Off