Connecting Optional Equipment 1-7 the cable's other connectors into the corresponding audio input jacks on the monitor. A monitor with monaural sound capability, can still accept both Amiga audio channels. Either use a "Y" adapter cable plugged into both Amiga audio jacks, or plug a single audio cable into one of the jacks. Insert the other end of the cable into the monitor's audio input jack. Both audio channels will be routed to the monitor speaker. If your monitor does not have speakers, you can connect the Amiga's audio output to separate powered speakers, a stereo system, or other audio equipment. Use input connectors labeled Auxiliary, Aux, Audio In, CD, Tape, VCR Audio, etc.
on the equipment. You need a stereo audio cable with RCA connectors at one end and the appropriate type of connector for your equipment at the other end. Audio cables and adapters are available from most electronics and stereo stores. Insert the RCA connectors into the Amiga's audio output jacks and the other connectors into the equipment's audio input jacks. Consult the equipment's user manual for further instructions on using its external inputs. If!iiiiijii!1l To attach an external 3.5-inch floppy drive to the Amiga, o use the port labeled FLOPPY. The drive must be Amiga If compatible, with a 23-pin male connector.
Attaching an External Floppy Drive Audio Connection to a Monaural Monitor Audio Connection to Other Equipment