Chapter 3: RAID Confi guration 3.2.4 Using Physical Confi guration Utility 1. Power on your computer. When prompted, press the and keys simultaneously to enter the RAID Confi guration Utility. From the RAID Confi guration Main Menu, select "SerialSelect Utility" and press to access the Physical Confi guration submenu as shown below. 2. Select "Physical Confi guration" and press to access SAS/SATA Device Confi guration submenu. 3. Use the arrow keys to select an item. Press to see the confi guration settings of the item selected as shown in the screen above. 4. Use the up/down arrow keys to highlight the setting you wish to confi gure and press . (*Note: To load default settings, press .) 5.
Press to return to the previous menu and to exit the utility. 3-25