Chapter 3: RAID Confi guration 6. After fi nishing with the Registration Screen, hit to enter the Adaptec Storage Manager Utility as shown below. 7. Double-click on the ASM Controller Icon (above) to display the ASM status screen as shown below. *Notes: 1. If the AMI MG-9072 Firmware is used, two enclosures with eight HDDs will be displayed. If the AMI MG-9071 is used, only one enclosure with 4 HDDs will be available. 2. If the triangle icon appears, the Enclosure Management Devices are properly installed. If the triangle icon does not dis- play, please check: a. If you have an add-on card that supports SES-2, b. If the Side Band of the add-on card is properly installed (eg:
pin 1 to pin 1), c. If your ASM version is compatible with your Storage Driver Version.) 3-33