Chapter 3: Software Application and Usage 14. Miscellaneous Remote Console Settings: This window allows you to specify the following Remote Console Settings. 15. Start in Monitor Mode: Check this box to enable the Start in Monitor Mode which will allow data to be displayed in the remote monitor as soon as Remote Con- sole is activated. (The data displayed in the remote monitor is ready-only.) 16. Start in Exclusive Access Mode: Check this box to enable the exclusive ac- cess mode immediately at Remote Console startup, which will force all other users connected to the network to close. No other users can open the Remote Console until you disable this function or log off.
0RXVH+RWNH\ This option allows you to use a hotkey combination to specify the mouse synchronization mode or the single mouse mode. +RWNH\ Enter a hotkey combination in the box to specify the mouse synchroni- zation mode or the single mouse mode. 19. Remote Console Button Keys: 7KLVZLQGRZDOORZVWKHXVHUWRGHїQHEXWWRQ keys for the remote host. The button keys allow simulating keystrokes on a remote host or issuing commands to a remote system. The button keys are needed when you have a missing key or when you want to prevent interference caused to the lo- cal system.
After a remote console button key is set, it will appear on the right upper corner of the remote monitor screen as shown in the graphics below. (For details LQVWUXFWLRQVLQFUHDWLQJEXWWRQNH\VSOHDVHFOLFNRQWKHOLQN&OLFNKHUHIRU+HOS 20 Button Keys: Enter the syntax of a button key in the box. (For detailed instruc- WLRQVLQFUHDWLQJEXWWRQNH\VSOHDVHFOLFNRQWKHOLQN&OLFNKHUHIRU+HOS 21 Name: Key in the name of a button key in the box. (For details instructions in FUHDWLQJEXWWRQNH\VSOHDVHFOLFNRQWKHOLQN&OLFNKHUHIRU+HOS 22 More Entries: Click on this icon to create more Button Keys. 19 3-23