Starting and Stopping If your Lisa 2 system is not yet set up, refer to Appendix 1, Setup Procedures. TURNING THE LISA 2 ON AND OFF Simple! Just press the on-off button. The button is lit when the system is on. Pressing the on-off button tells the Lisa to prepare for wor king or to put your work away. After pressing the button, there's a slight delay as the system shuts down or readies the Lisa to work for you. For a more detailed account of what your system is doing during startup see Appendix 2, On-Off Procedures, and Appendix 3, Automatic Startup Tests. B5