Diagnosis are available. The system will automatically start the diagnostic procedure if you set the “Automatic detection on connect” to be “ON” in “Settings”. Note: Not all cars support the AutoVIN function due to auto manufacturers' settings. Follow the steps below to proceed. Start Decoding Vehicle VIN Decoding OK Decoding Failed Confirm Vehicle VIN Input VIN Manually Select “Diagnose” Scan Available Systems Select Vehicle Make, Model and Test Systems Output Diagnostic Report Select Diagnostic Functions and Continue Note: The diagnostic menu may vary by the vehicle’s make, model, and year. IMPORTANT: Read the instruction carefully and use the unit properly before operating.
Failure to do so may cause damage and/or personal injury, which will void the product warranty. Note: This Quick Start Guide is subject to change without written notice. 4 Start Diagnostics EN Both the Automatic Smart (AutoVIN) Diagnosis and Manual