OPERATION INTRODUCTION TOPDON ArtiDiag Pro has 8 major modules, including Diagnostics, Services, Remote Assistance, I/M, Feedback, Upgrade, Other Modules, and Settings. 1. Diagnostics TOPDON ArtiDiag Pro supports Smart Diagnosis and Manual Diagnosis covering OBDII diagnosis, full system diagnosis for most modern vehicles worldwide. A diagnostic report will be automatically generated after the diagnosis. 1.1 Smart Diagnosis (Auto-Detect) Power on the ArtiDiag Pro. Tap “Settings”, and make sure the “Automatic detection on connect” is on. *Note: Alternatively, the user can also tap "Diagnose" -> "AutoDetect" to start the smart diagnosis manually if the “Automatic detection on connect” is Off.
Connect to the DLC’s port, and then turn the ignition key on. The ArtiDiag Pro will enter the Smart Diagnosis mode automatically. *Note: If the automatic detection can not identify the vehicle, please try to connect to the network. Not all cars support the Auto-Detect function due to auto manufacturers' settings. 1.1.1 Once the system successfully obtains the VIN (Vehicle Identification Number), it will continue scanning the vehicle systems. A diagnostic report will be automatically generated after the scanning is completed. 10