1.6 Diagnostic History The tablet will record the details of every diagnostic session. The History function provides direct access to the previously tested vehicles. Users can resume from the last operation, without the necessity of starting from scratch. Tap “HISTORY” in the “Scan” module. All diagnostic records will be listed on the screen in a date sequence. 2. I/M Readiness This function checks whether or not the various emissions-related systems on the vehicle are operating properly, and are ready for Inspection and Maintenance testing. It can also be used to check the Monitor Run Status and to confirm if the repair of a car fault has been performed correctly. 3.
OBDII/EOBD Diagnostics This function presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform other services that are emission-related. Tap “OBDII/EOBD” in the Home Menu after the tablet is properly connected to the vehicle’s DLC port. The tablet will start an automatic check of the vehicle’s computer to determine which type of communication protocol it is using, then display the Monitor Status as follows: 14