3.6 On-Board Monitor Test This function retrieves test results for emission-related powertrain components and systems that are not continuously monitored. The test’s availability is determined by the vehicle manufacturer. 3.7 EVAP System Test This function initiates a leak test for the vehicle’s EVAP system. Refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test. 3.8 Vehicle Info This function retrieves a list of information (provided by the vehicle manufacturer) from the vehicle’s on-board computer. This information may include: • VIN (Vehicle Identification Number). • CID (Calibration ID). • CVN (Calibration Verification Number). 4.
Repair Info This module includes four sections: 1) OBD Fault Code Library: The detailed explanation of the fault codes. 2) Coverage List: The supported vehicles’ information. 3) Videos: Contains table usage tips, maintenance, and diagnostic guides. 4) Learning Course: Demonstrates how to operate the tool. 5. Maintenance & Reset TOPDON ArtiDiag600 S features 8 most commonly used maintenance and reset functions. 5.1 BLEED (ABS Bleeding) This function enables you to perform tests to check the operating conditions of the Anti-lock Braking System (ABS). It needs to be performed in the following cases: When the ABS contains air.
When the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced. 16