AS-4000 User’s Guide Troubleshooting Troubleshooting If the Colors of the Printed Color Samples Do Not Match After Group-adjusting Spot Colors Try the following solutions. ❏ Match the colors using the Epson Edge Print Label output color adjustment chart job Print an output color adjustment chart job from Epson Edge Print Label and match the colors by visually selecting the output colors. U Help for Epson Edge Print Label ❏ If the above solution does not solve the problem This may be due to physical factors such as dirt on parts of the press. Cleaning parts may clear the problem.
U “Cleaning the Backing” on page 74 U “Stirring the Ink Cartridges” on page 102 U “Performing Head Cleaning” on page 102 If the Process Colors Do Not Match When Printing Take the following actions in order. Once the problem has been resolved, you do not have to try any further solutions. ❏ Apply the correct ICC Profile Make sure that the correct ICC profile has been selected in the Epson Edge Print Label quick set. U Epson Edge Print Label Help ❏ Check the color accuracy of the press Specify the print information used for printing to check the color accuracy of the press. If the values are below the standard values, try the following solution.
U “If Determination1 or Determination2 Does Not Meet the Standards as a Result of Checking the Color Accuracy of the Press” on page 97 If the Colors Do Not Match Between Presses Take the following actions in order. Once the problem has been resolved, you do not have to try any further solutions. ❏ Apply the correct ICC Profile Make sure that the correct ICC profile has been selected in the Epson Edge Print Label quick set. U Epson Edge Print Label Help ❏ Make sure that the same ICC profile has been selected between presses Make sure that the same ICC profile has been selected for all jobs sent from Epson Edge Print Label. 96