AS Series Hardware Manual Revision History Version Revision Date 1 s t The first version was published. 2016/11/30 2 n d 1. Added information on new modules AS08AD-B/C, AS02/04PU-A, AS320T/P-B, AS300N-A, AS228R/T/P-A, AS218RX/TX/PX-A, AS06RTD-A, AS08TC-A, AS-FEN02, and AS01DNET-A 2. Updated Chapter 9 2018/02/9 3 r d 1. Chapter 3: Specification Corrections 2018/03/22 4 t h 1. Updated output resistance information in Chapters 1-5. 2. Error corrections in Chapters 1-3. 2018/06/20 5 t h 1. Update voltage/current specifications of PLC and DIO modules. 2. Update impedance allowance specifications of 04DA, 06XA, and F2DA. 2018/09/10 6 t h 1. Added new product information in chapters 1-3. 2.
Added endurance specification in section 3.1. 3. Updated electric isolation information in sections 3.2.2, 3.4.1, 3.7.1, and 3.8.1. 4. Removed the Ehternet Communication Specification in chapter 3. 5. Added a note concerning Spring clamp/MIL connector terminal block UB-10-IO32D for AS332T-A / AS332P-A / AS324MT-A in section 3.2.3. 6. Added AS200 Series Analog Input/Output Specifications in section 3.2.5. 7. Added Maximum Input Frequency Specification in sections 3.4.1. 8. Revised AS64AM10N-A Digital Input/Output Module Terminals in section 3.4.3. 9. Revised AS04AD-A / AS08AD-B / AS08AD-C General Specification in section 3.5.1.
10.Revised AS02PU-A and AS04PU-A Positioning Module General Specification in section 3.7.1. 11.Added AS02HC-A High-Speed Counter Module information in sections 3.8.1, 3.8.2 and 3.8.3. 12.Added AS04SIL-A Network Module information in sections 3.9.1 and 3.9.2. 13.Revised AS02PU-A and AS04PU-A Position Module Profiles in section 3.7.2. 14.Added Ethernet Communication Specifications for AS-FEN02 and AS-FPFN02 in section 3.11.1. 15.Added AS-FPFN02 Extension Card Profiles in section 3.11.2. 16.Added AS-FPFN02 Extension Card Weights in section 3.11.3. 17.Updated power cable diameter in sections 5.1-5.3. 2019/12/31