AS Series Hardware Manual 2.1 AS Series Hardware Framework 2.1.1 AS Series Hardware Component The AS series programmable logic controller is a medium-to-small programmable logic control (PLC). The execution speed and memory capacity are increased. Use of function blocks is also supported. In order to meet your more _2 advanced application requirements, the AS series programmable logic controllers provide more flexible system extension frameworks. Under such system frameworks, you do not need to use several CPU modules to control the system because there are too many I/O points or the equipment is too far away.
This retains system completeness, and you can be more efficient in developing projects. The minimum framework requirement for the AS series system is one CPU module and one power supply module to operate the CPU module. Power supply module + AS series PLC (AS-PS02 + AS332T-A) The following lists the limits for setting up a common framework of the AS PLC system. Exceeding any one of the limits causes the PLC to send an error message. Limit 1: You can connect up to 32 extension modules to the PLC, not including the power module, CPU module, and remote module. Limit 2: The maximum number of digital I/O points is 1024. The built-in digital I/O points of the CPU module are included. Limit 3:
You can connect up to 16 analog modules to the PLC, including AD, DA, XA, RTD, TC and LC. Limit 4: You can connect up to four communication modules (AS00SCM/AS01DNET-A/AS04SIL-A) in total to the PLC. Limit 5: You can connect up to 15 remote modules (AS00SCM+AS-FCOPM) to the PLC. The remote modules can work with up to eight digital/analog modules. Limit 6: You can connect up to 15 remote modules (AS00SCM+AS-FEN02) to the PLC. The remote modules can 2-2