III. HARDWARE SETUP 6. Joystick/Midi Connector (15-pin GAME_AUDIO) You may connect game joysticks or game pads to this connector for playing games. Connect MIDI devices for playing or editing audio. Joystick/Midi (15-pin Female) 7. Audio Port Connectors (Three 1/8” GAME_AUDIO) Line Out can be connected to headphones or preferably powered speakers. Line In allows tape players or other audio sources to be recorded by your com- puter or played through the Line Out . Mic allows microphones to be connected for inputing voice. Connectors III. H/W SETUP Mic Line In Line Out 1/8" Stereo Audio Connectors 8.
ATX Power Supply Connector (20-pin block ATXPWR) This connector connects to an ATX power supply. The plug from the power sup- ply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. IMPORTANT: Make sure that your ATX power supply can supply at least 10mA on the +5 volt standby lead (+5VSB). You may experience difficulty in power- ing on your system if your power supply cannot support the load. For Wake-On- LAN support, your ATX power supply must supply at least 720mA +5VSB.
0 1 0 1 0 1 +3.3Volts -12.0Volts Ground Power Supply On Ground Ground Ground -5.0 Volts +5.0 Volts +5.0 Volts +3.3 Volts +3.3 Volts Ground +5.0 Volts Ground +5.0 Volts Ground Power Good +5V Standby R +12.0Volts MEL-M MEL-M ATX Power Connector ASUS MEL-M User’s Manual 25