3. HARDWARE SETUP 1) PCI 3Volt Setting (3VSBSLT) This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to 3 VSB . Setting 3VSBSLT 3 Volt [1-2] 3 VSB [2-3] (default) Motherboard Settings 3. H/W SETUP 2) 3.3V Power Source Setting (JP3001–JP3008) (Requires optional components.) This jumper lets you select the onboard 3.3V from the motherboard if your ATX power supply does not have a 3.3V lead and 3.3V optional components are mounted on the motherboard. This motherboard normally does not have the 3.3V components and therefore requires a standard ATX power supply with its own 3.3V lead.
Setting JP3001-JP3008 3.3V from PWR [1-2] (default) 3.3V from MB [0-0] JP3001–JP3008 JP3001 JP3008 3.3V from Power Supply (Default) 3.3V from Motherboard K7M-RM 3.3V Power Source Setting ® 18 ASUS K7M-RM User’s Manual MR-M7K 0 1 0 1 0 1