3. HARDWARE SETUP Motherboard Feature Settings (DSW) Besides jumper settings, some of the motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position. 1 2 3 4 5 6 7 8 Motherboard Settings 3. H/W SETUP DSW1 ® CUA ON 1: Frequency Selection 2: Frequency Selection 3: Frequency Selection 4: Frequency Selection 5: Frequency Multiple 6: Frequency Multiple 7: Frequency Multiple 8: Frequency Multiple OFF CUA DIP Switches 1) JumperFree™ Mode (JEN) This jumper allows you to enable or disable the JumperFree™ mode.
The JumperFree™ mode allows processor settings to be made through the BIOS setup (see Advanced Menu , BIOS). IMPORTANT: In JumperFree™ mode, all DIP switches (DSW) must be set to OFF. Setting JEN Enable (JumperFree) [2-3] (default) Disable (Jumper) [1-2] CUA JumperFree™ Mode Setting 18 ASUS CUA User’s Manual ® CU 8 7 6 DSW1 5 4 3 ON 2 1 A OFF Jumper JEN JumperFree (Default) 1 2 2 3