4. BIOS SETUP ONB SCSI LVD Term. [Enabled] This enables you to enable or disable the onboard termination for Ultra2 devices, such as disk drives, using low voltage differential (LVD) technol- ogy. LVD allows the onboard SCSI chipset to support a maximum of 15 devices on a 12m cable, a fourfold increase over UltraSCSI cable length. In a point-to-point configuration, the cabling can be extended up to 25m. This increased length allows greater flexibility in your system configuration, es- pecially in RAID and clustering applications. Configuration options: [Dis- abled] [Enabled] USB Function [Enabled] This motherboard supports Universal Serial Bus (USB) devices.
Set to [En- abled] if you want to use USB devices. Configuration options: [Disabled] [Enabled] VGA BIOS Sequence [PCI/AGP] If your computer has both PCI and AGP VGA cards, this field allows you to select which of the cards will act as your primary card. The default, [PCI/ AGP], allows your PCI card to take precedent when detected. [AGP/PCI] uses the AGP card as your primary card. Configuration options: [PCI/AGP] [AGP/PCI] Onboard LAN Boot ROM [Disabled] Leave on default setting. 4. BIOS SETUP PCI Configuration ASUS P3C-L / P3C-S / P3C-LS User’s Manual 74