Adding Tools to the Form NOTE: If the position or size of the tools on the form exceeds the form boundaries, vertical and/or hori- zontal scroll bars are automatically added to the UI form. Alignment Guides and Grid Pattern The Designer area contains two useful tools for aligning the items on the UI form: the alignment guides and the grid pattern. The grid pattern is enabled/disabled using the grid icon ( ) on the UI Builder toolbar. l When the grid is disabled, the alignment guides automatically show as you drag a form item into proximity of the X and/or Y axis of another form item.
Alignment Guides l When the grid is enabled, an X - Y pattern of dots appear on the form, which are used to align the form items. The alignment guides are disabled when the grid is enabled. Grid Pattern A Note About Conditional Link and Image List Tools The Conditional Link and Image List are special tools that are associated with the UI form but not located directly on the form. When a Conditional Link or Image List tool is added to the UI form, it is automatically relocated to the area below the form, as shown in the following figure. ACE User's Guide, 3.6.x 18316-000 Rev A Page 1018