Applying Behavior Parameters to the Tab Control Tab Names Changed to Images (Before and After) Applying Behavior Parameters to the Tab Control For certain applications, you may want to modify the location or appearance of the tabs (for example, pos- ition the tabs at the bottom of the control, or change the tabs from a standard tab to a button). Changing the Tab Location To change the tab location: 1. Select the Tab Container tool from the previous example. 2. Locate the Behavior > Alignment parameter. 3. Select Bottom. The tabs are relocated to the bottom of the Tab Control tool, as shown in the fol- lowing figure.
Tabs Relocated to Bottom Changing the Tabs to Buttons To change the tabs so they appear as buttons: 1. Select the Tab Container tool from the previous example. 2. Locate the Behavior > Appearance parameter. 3. Select Buttons or Flat Buttons. The tabs are changed to the selected button format, as shown in the ACE User's Guide, 3.6.x 18316-000 Rev A Page 1074