System Monitor The following Process Manager Belt parameters can be monitored: The following Process Manager Process and Robot parameters can be monitored: NOTE: The statistics, with the exception of Parts Not Processed and Targets Not Processed, are also exposed to the numeric variable object. This allows them to be exported to OPC. For details, see Variable Editor on page 131. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 1119 Parameter Description warning limit (yellow bar), and never reach the max error limit (red bar). Peak velocity (RPM) The peak velocity, in rotations per minute, for the selected motor.
This should operate below the specified max warning limit (yellow bar), and never reach the max error limit (red bar). Peak position error (% soft envelope error) The peak position error, as a percentage of soft envelope error, for the selected motor. This should operate below the specified max warning limit (yellow bar), and never reach the max error limit (red bar). Parameter Description Instance Count The number of instances that have been available since the last restart or reset. Belt Velocity The average velocity of the conveyor belt. Instantaneous Instances The instantaneous instances since the last restart or reset.
This is calculated over the update period selected in the System Dia- gnostics settings. If the graph is updated 500 ms, it will tell you the instantaneous instances/minute over each 500 ms time segment. Instances Per Minute The average number of instances per minute. Active Instances The number of active instances on the belt. Latch Faults The number of latch faults since the last restart or reset. Parameter Description Idle Time (%) The average idle time percentage of the total run time since the last restart or reset.
("Idle" is when the Process Manager is waiting on part or part target instances to process.) Processing Time (%) The average processing time percentage of the total run time since the last restart or reset. ("Processing" is when the Process Manager