3D Visualization object's editor and deselect the "Show in visualization" option or set the "3D Visualization > Visible" property to false. In addition to the robot, the 3D Visualization window also shows additional information, such as: l The graphical representation of all belts in the workspace. l The robot belt windows l The robot belt dynamic wait line l The belt lane widths (This applies only to Process Manager Belt Calibrations. For details on Process Manager Belt Cal- ibrations, see Belt Calibrations on page 848.) l The location of latch sensors l The field of view (FOV) of each camera. l The Process Manager objects and Part / Part Target instances. Instances are shown as follows:
l Part allocated = yellow l Part not allocated = orange l Part Target allocated = light green l Part Target not allocated = green Toolbar Items This section describes the items available on the 3D Visualization toolbar: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 177 Item Description Zoom/Translate/Rotate These functions are used to change your view of the workcell. Select the desired function from the toolbar and then use the left mouse button to control the selected function. You can also use: the Shift (Zoom), Alt (Translate), and Control (Rotate) keys along with the left l mouse button, to access and control the functions. the middle mouse button (pressed) to rotate the view.
l the mouse scroll wheel (not pressed) to zoom in or out. l For rotation: If you click on an object to start the rotation, it will rotate around the origin of the l selected object. If you do not click on the object, it will rotate around the scene center (average X, Y, l Z position of all objects in the scene).