Adding and Removing Monitored Items Add Items to Collect Dialog To add a new item: 1. On the Motor Tuning dialog box, click Add . The Add Items to Collect dialog box opens (see the figure above). 2. Specify the value to be monitored: l Enter an Absolute Address (select the Hex check box, if you wish to enter the value in hex format) and select the Data Format from the drop-down list. OR l Select an Opcode from the drop-down list. For a description of each of the items, see the topic Data Collection Parameters . 3. Select (check) the box next to the motor(s) to be added. 4. Click Add to add the items and close the dialog box. The items are listed in the Motor Tuning dialog box.
To remove an item: 1. On the Motor Tuning dialog box, select the item to be removed from the list. 2. Click Remove . The selected item is removed from the list. ACE User's Guide, 3.6.x 18316-000 Rev A Page 238