Adding a Camera Adding a Virtual Camera Adding a Camera All of the supported physical cameras use a Basler Pylon device driver. Adding a Camera to the Workspace To add a camera: 1. Right-click in the Tree structure pane of the ACE Workspace Explorer and select: New > Vision > Device > Basler Pylon Device l Basler Pylon Device will be displayed in a pop-up window, along with a list of available devices. If there is only one camera attached to the system, that will be the only camera displayed. l For most devices, you are offered the option of creating a virtual camera when you add the device, by checking a box in the camera-creation window. This box is checked by default.
Click it if you want to un-check it. l In Emulation Mode, you do not have to select a camera. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 316