Blob Analyzer Blob Analyzer Results Results for found blobs appear as a graphic display and in the grid of results, below the dis- play, as shown in the following figure. Found blobs are shown in green. Clicking any of the instance lines in the Results Grid turns the origin for that blob blue. Display Window The Display window shows the image being processed, the region of interest selected, and the locations of found instances. The elapsed time is displayed at the bottom of this window. Blob Analyzer Results in Display Window and Results Grid The Display pane can show Marker, Blob Image, or Both. This is specified in the Results Dis- play Mode property.
Grid of Results The Grid of Results presents the statistical results for the region of interest analyzed by the Blob Analyzer. Results are described in the section Description of Blob Analyzer Results on page 418. Enabling Blob Analyzer Results Because of the large number of results that can be calculated and output by the Blob Ana- lyzer, only General Results are output by default. To enable the output of other types of results, the output must be configured in the Advanced Parameters section. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 417