Image Sampling Transform Properties Transform operations convert and output a frequency description of the input image. The available operations are a Fast Fourier Transform (FFT) and a Discrete Cosine Transform (DCT). These transforms can be output as 1D Linear, 2D Linear, 2D Logarithmic or His- togram. Transform Flags Transform Flags sets the flag used by a transform operation, either FFT or DCT. Image Processing Tool Results The Image Processing Tool outputs images that can be used by other vision tools. This tool does not output frame results. Viewing Results The results for each execution of the tool are represented in the display Vision window.
Description of Image Processing Tool Results The Image Processing Tool outputs the following results: Elapsed Time The Elapsed Time is the total execution time of the Image Processing Tool. Elapsed Time is available at the bottom of the window in which the result is dis- played. Related Topics Image Processing Configuring Image Processing Properties Image Sampling The Image Sampling Tool is used to extract an area of an image and output it as a separate image. To create an Image Sampling tool, right-click in the Tree structure, then select: New > Vision > Tool > Image Sampling ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 525