Inspection Related Topics Image Sharpness Configuring Image Sharpness Properties - Advanced Inspection The Inspection tool sorts instances based on the results of other tools and inspection filters. To create an Inspection tool, right-click in the Tree structure, then select: New > Vision > Tool > Inspection ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 536 Object Definition Average The average sharpness value calculated for the current instance. The sharpness value ranges from a maximum of 1000, indicating a very sharp image, to 0, indicating a very blurry image. Point Count Point Count is the number of points used to meas- ure the average sharpness for the current region of interest.
This can be less than the number of Candidate Points set in the Configuration panel. Measurement Points are the points used to cal- culate the average Sharpness result. Only the Candidate Points that meet the Standard Devi- ation Threshold are retained as measurement points. Peak Peak is the maximum average sharpness value computed by the tool since the history was reset.