Locator Model The Custom Model Identifier can be any integer from 0 to 999999999. See the following fig- ure: Custom Model Identifier Drop-down Box The Use Custom Model Identifier box must be checked before a value can be entered for the identifier. If this box is not checked, the Locator tool will assign numbers automatically. Results None. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 576 Object Definition Origin Offset Defines the position of the model's origin in the World coordinate system. The origin, defined by the X, Y, and Degrees properties, is used by the Locator to express the pose of instances of the model.
The model's origin is also used as the pivot point around which the rotation of the instance is measured. This origin defines the object coordin- ate system that can be used to express results of model-based inspection tools. Region of Interest (ROI) Offset Specifies the center and rotation of the ROI. X, Y, Degrees. Search Region Defines the height and width of the region of interest. Tool Links Image Source Defines the image source used for processing by this vision tool.