Pattern Locator Pattern Model Pattern Examples Basic Steps for Configuring a Pattern Locator 1. Select the tool that will provide input images. 2. Position the Pattern Locator tool. 3. Create and edit a Pattern. 4. Test and verify the results. 5. Configure the Advanced properties, if required. Input The Input required by the Pattern Locator is an image provided by another tool, such as the Image Processing Tool. To set the Input: 1. Execute the tool once to make sure that an input image is available. 2. From the Input drop-down list, select the tool that will provide the input image.
Location Location parameters define the position of the tool’s region of interest in which the tool car- ries out its process. The positioning mode is defined by the Frame Input parameter. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 584