ACE Sight Camera Calibration 320. l The PC running the ACE Sight software must be connected to the controller for the robot (and belt). l The ACE Sight Belt Calibration Wizard must have completed successfully, if a conveyor belt will be used (a belt calibration object must exist in the workspace). See ACE Sight Belt Calibration on page 627. Next Step Run the ACE Sight Camera Calibration Interview Wizard. See ACE Sight Camera Calibration Interview Wizard on page 642.
Related Topics Calibration Overview ACE Sight Belt Calibration ACE Sight Camera Calibration Interview Wizard ACE Sight Camera Calibration Wizard - Automated, no Belt ACE Sight Camera Calibration Wizard - Automated, w/ Belt ACE Sight Camera Calibration Wizard - Automated Upward-Looking ACE Sight Camera Calibration Wizard - Automated, Arm-mount ACE Sight Camera Calibration Wizard - Manual, no Belt ACE Sight Camera Calibration Wizard - Manual w/Belt ACE Sight Camera Calibration Wizard - Manual, Upward-looking ACE Sight Camera Calibration Wizard - Manual, Arm-mount ACE Sight Camera Calibration Interview Wizard The ACE Sight Camera Calibration Interview Wizard acquires the data necessary to generate the correct ACE Sight Camera Calibration Wizard.
It does not automatically run that wizard. What this Wizard Does With this wizard you will: l Select the robot, gripper, and virtual camera l Specify the camera mounting (fixed-mounted, arm-mounted) ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 642