Configuration, Editor Parameters, and Online Help Close Closes the object editor. Configuration, Editor Parameters, and Online Help The middle portion of the Part editor contains the Configuration drop-down list box, Configuration editor items, and online help for the editor parameters. Configuration Drop-down List Box The Configuration drop-down list box is used to specify how the part is input to the system. The choices are: l Belt - parts are located on a conveyor belt (using latching or fixed-spacing); optionally, vision and/or a pallet may be included in the part delivery system. l Static - parts are acquired from a static location, such as a part feeder or a pallet.
l Vision - parts locations are acquired through the vision system. The camera is not located over a belt. NOTE: If the part is supplied on a belt with a camera, the Belt option must be selected. Properties Editor The Properties editor is used to specify the configuration for the type of part configuration selected. Each item is described in the online help for that item. For details, see Creating a Part Configuration . Online Help The bottom part of the Part object editor displays online help for the selected parameters. NOTE: Because online help for each parameter is provided directly in the editor, it is not duplicated in this documentation.
Creating a Part Configuration This section describes how to create a part configuration. Using a Custom Model for the 3D Display By default, ACE uses a "widget" to represent parts and part targets in the 3D visualization display. However, you have the option to use a custom model, which is imported from an STL mesh file. For details on the 3D visualization display, see 3D Visualization on page 176. ACE User's Guide, 3.6.x 18316-000 Rev A Page 830