Configuration Errors Configuration Errors If there is a configuration error, an alert icon ( ) displays in the corresponding controller row. If you hover the mouse pointer over the icon, a message displays that describes the error. For example: For more details on configuration messages and their associated codes, see Status/Error Codes on page 932. Creating an Application The following steps are used to create an application: 1. Create a Process. For details, see Creating a Process on page 888. 2. Perform the Belt Calibrations, as needed. For details, see Belt Calibrations on page 848.
ACE User's Guide, 3.6.x, 18316-000 Rev A Page 845 Item Description Configuration Items Defines the workcell items, and the relationships between those items, that are associated with a particular workcell configuration. For details, see Configuration Items. Processes Defines the elements (robot, pick location, place location) for a particular process. For details, see Process. Sensor Calibrations Defines the robot-to-sensor calibrations for the selected workcell process. For details, see Sensor Calibrations.